Filter
Top Products
7
ESTRADA
™
4743040 AT0907
Step 6a. Attach the fan wires to the ceiling fi xture outlet
box wiring by placing the bare ends of the wires side
by side and then securing with a wire nut. Test that the
connection is secure by pulling on the wire nut. Connect
in this order:
Step 6b. Pull-chain Connections
• GREEN leads from mounting plate and fan to
GROUND conductor of power source. Secure with
wire nut.
• WHITE wire from fan to white NEUTRAL wire in
ceiling fi xture outlet box. Secure with wire nut.
• BLUE wire and BLACK power wire from fan to
BLACK power wire in ceiling outlet box. Secure with
wire nut.
CANOPY ELECTRICAL CONNECTIONS
Step 7. Tuck the wires into the canopy with the
wire nuts pointed upwards, so that the WHITE and
BLACK wires are on opposite sides of the canopy
and all wires are clear of the canopy opening.
Step 8a. Install canopy hatch with the last canopy
screw and lock washer. To do this, tilt the fan body
away from the hatch opening. Tighten the screws
fi rmly by hand only.
Step 8b. Straighten the fan, then check to ensure
that there is no movement between the canopy and
ceiling or Hang-Tru ball and top support shaft.
NOTE: Write down the Serial Number and the
model number for future reference.
CANOPY HATCH INSTALLATION
2 Black Wires
(Power) &
1 Blue Wire
2 White
Wires
(Neutral)
3 Green
Wires
(Ground)
Wire Nut
BLADE INSTALLATION
Step 9. Attach the blades to the blade holders by fi rst
pressing the blade badge into the blade, then installing
the blade holder using the four blade screws provided for
each blade.
Using the screwdriver, tighten securely by hand.
Canopy
Hatch
Lock
Washer
Canopy
Screw
Blade Screw
(4 per blade)
Badge Style
Blade Holder
Blade
Badge
Blade
Tilt the fan
to install
last canopy
screw