Filter
Top Products
4. Remove cover from control box and disconnect thermostat
and power wires from the board.
5. Slide blower forward on rails toward front of unit.
6. Reverse items 1 through 5 to re-install blower. Refer to wiring
diagram (Fig. 3 or 4) of these instructions or diagram located
on inside of blower door to properly rewire unit.
Copyright 2003 CARRIER Corp. • 7310 W. Morris St. • Indianapolis, IN 46231 58cma4si
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Book 1 4
Tab 6a 8a
PC 101 Catalog No. 535–80076 Printed in U.S.A. Form 58CMA-4SI Pg 12 9-03 Replaces: 58CMA-3SI