Filter
Top Products
139
wPrinting
5
Set the date and file number
imprinting.
Set as necessary.
Select <
I>, then press <0>.
Set as desired, then press <0>.
6
Set the number of copies.
Set as necessary.
Select <
R>, then press <0>.
Set the number of copies, then press
<0>.
7
Start printing.
Select [Print], then press <0>.
X The <l> button’s blue lamp will
blink and the printing will start.
To print another image with the same settings in easy printing, select the
image and just press the <
l> button lit in blue. Trimming will not be
applied to 1-copy easy printing.
For details on trimming, see page 141.
The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
Depending on the image’s file size and image-recording quality, it may
take some time for the printing to start after you select [Print]. This also
applies to image tilt correction. (p.141)
To stop the printing, press <
0> while [Stop] is displayed, then select
[OK].