Filter
Top Products
24
Caring for Your Machine
CAUTION
Make sure the power to the
machine is off before cleaning
sewing machine.
Turn machine off.1
Remove foot.2
Remove needle plate.3
Clean out dust and thread 4
scraps.
Thread scraps can be swept out ✽
through the bobbin door.
When the area under the needle 5
plate is cleaned out, oil hook
of bobbin case with sewing
machine oil.
Use a cloth to clean the machine ✽
of any excess oil.
Attach needle plate and foot.6
Hook
Lubrication Points
When using the sewing machine ●
every day, apply a few drops of
oil to each location indicated
twice a month.
Use a cloth to wipe the machine ✽
clean of any oil spilled near the
lubrication points.
Cleaning the Machine
Keep Your Sewing Machine Clean ■
Please use a soft, dry cloth to wipe off light dirt and
dust. If sewing machine is very dirty, wipe with a cloth
soaked in warm water, or in warm water containing a
neutral detergent. Then wipe off any detergent residue,
and wipe off water with a dry cloth.
Precautions ■
Please keep sewing machine away from heat sources
such as irons and space heaters. Do not use chemicals
like benzine or thinner to clean your machine. When
machine is not in use, please keep machine out of
direct sunlight.
Item Specification
Sewing Speed
(maximum)
1,500 stitches per minute
Stitch Length
(pitch)
0 – 7 mm
Stroke of
Needle
34.1 mm
Stroke of
Thread Take-
Up Lever
64.7 mm
Foot Height
Foot Lift One 6 mm
Two 9 mm
Knee control Over 10 mm
Item Specification
Height of feed dog
0.7 mm, 1.1 mm
Height of
lower needle
3 mm – 3.5 mm
Needles that
may be used
HLX5#9 – #18
SCHMETZ 130/705H #65 – #110
Bed dimensions
439 mm × 178 mm (17 1/4 × 7 inches)
Total weight 11 kg (24 1/4 lbs.)
Sewing Light
120V model: 120V/15W
Parts code: X53061-050
220-240V model:
240V/15W
Parts code: 205336-050
Sewing area
595 mm × 285 mm
(23 3/8 × 11 1/4 inches)