Filter
Top Products
21
Invisible Zipper Foot
Attach invisible zipper foot.1
Align zipper with fabric. Mark 2
the base of the opening
approximately 2 cm above the
end of the zipper.
Baste the zipper position.3
Separate the seam allowance.4
With the zipper mounted, baste 5
just the seam margin on one
side of the zipper.
Close the zipper and baste the 6
other side of the zipper.
Remove the basting at the 7
zipper position.
Fit the zipper teeth into the 8
presser foot groove, guide them
to prevent them from falling
over, and sew to the base of the
opening.
When sewing with the teeth to ✽
the right, the left side of the foot
should line up with the left teeth
of the zipper.
Baste
2 cm
Base of
Opening
Slide
Teeth
Basting
Basting
1/4” Foot
Sewing machine settings: ●
Stitch length = 2 - 2.5 mm
Sew a consistent seam •
allowance (1/4”, 6.4 mm) when
piecing together a quilt.
Use guides (mark) to begin, •
end, or pivot 1/4” from edge of
fabric.
Accurately top stitch 1/8” from •
seam.
Seam allowance
(1/4”, 6.4 mm)
End of
stitching
Align this
mark with
edge of
fabric
Align this
mark with
edge of
fabric
Beginning
of
stitching
Top of fabric
Seam
(1/8”, 3.2 mm)