Filter
Top Products
23
Seam Guide
Tighten the screw securely 1
with a screwdriver since it
might otherwise loosen due to
vibration.
a
Installation
Adjustment
Turn adjustment screws as arrows
images suggest to set the position of
the Seam Guide foot.
Fabric Separator (for
joining lining to fabric)
Use this technique for sewing ✽
velvet and lining together.
Raise needle and foot.1
Move separator so it sits under 2
presser foot.
Make sure it is lined up so that 3
the needle passes through the
slot of the separator without
hitting the plate itself.
Secure liner plate in place with 4
lining plate screws.
Set pressure of sewing feet 5
and feed position to pin feeding
position.
Pull thread until lower needle 6
catches fabric.
Sew 2-3 reinforcement stitches. ✽
When not using separator, it 7
can be swung off to the side as
illustrated in drawing.
Fabric
Separator
Needle
Separator
Needle
Separator
Lining
Velvets
Note
• Lightenthepresserfootpressureslightlywhenusingthefabricseparator.
• Usetheseparatortoneatlysew2layersofhardtomanagefabricstogetherbykeepingthem
from interacting with one and other before the needle sews them together in a perfect seam.