Filter
Top Products
Blind Hem Stitching 75
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
6
Adjust the stitch width until the needle
slightly catches the fold of the hem.
1 Needle drop point
1 Stitch width
■ If the needle catches too much of the hem
fold
The needle is too far to the left.
Press (of the arrow keys) to decrease the
stitch width so that the needle slightly catches
the fold of the hem.
1 Wrong side of fabric
2 Right side of fabric
■ If the needle does not catch the hem fold
The needle is too far to the right.
Press (of the arrow keys) to increase the
stitch width so that the needle slightly catches
the fold of the hem.
1 Wrong side of fabric
2 Right side of fabric
• For details on changing the stitch width,
refer to “Adjusting the Stitch Width and
Length” (page 57).
7
Sew with the fold of the hem against the
presser foot guide.
8
Remove the basting stitching.
1 Wrong side of fabric
2 Right side of fabric
R
1
1
–
+
1
2
1
2
1
2
S3_brotherE.book Page 75 Thursday, May 15, 2003 1:58 PM