Filter
Top Products
UTILITY STITCHES ——————————————————————————————————————————————————————
—
114
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
5
Press (OK key).
X The contents of the selected pocket are
displayed.
6
Check the contents, and then press (OK
key).
To select a different pocket, press (back
key).
X The initial stitch screen appears again, and
the pattern from the selected pocket is
recalled.
Realigning the pattern
The pattern may not be sewn correctly, depending
on the type of fabric being sewn or the sewing speed.
If this occurs, adjust the pattern while sewing on a
piece of scrap fabric that is the same as that used for
your project.
1
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
foot” (page 41).
2
Press (stitch selection key) in the
operation panel.
X The screen containing the various types of
stitches appears.
3
Press , , and (arrow keys) until
is selected, and then select .
X The pattern alignment stitch is selected.
4
Start sewing.
X The pattern for making the adjustment is
sewn.
X The sewing machine stops after it has
finished sewing the pattern.
S3_brotherE.book Page 114 Thursday, May 15, 2003 1:58 PM