Filter
Top Products
Understanding the LCD Screens 13
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
Checking machine operating
procedures
Simple descriptions on replacing the presser foot,
threading the upper thread, winding the bobbin and
installing the bobbin can be displayed in the LCD.
1
Turn on the sewing machine.
X The LCD comes on.
2
Press (sewing machine help key) in the
operation panel.
X The sewing machine help screen appears.
3
Press , , and (arrow keys) until
the image illustrating desired topic is selected.
1 Replacing the presser foot
2 Threading the upper thread
3 Winding the bobbin
4 Installing the bobbin
4
Press (OK key).
X The first screen describing the procedure for
the selected topic appears.
5
To display the next screen, press . To
return to the previous screen, press .
Example: Upper threading
6
When you are finished with the help screen,
press (OK key).
X The initial stitch screen appears again.
Note
● For details on each topic, refer to the
corresponding page in this Operation
Manual.
1
3
4
2
S3_brotherE.book Page 13 Thursday, May 15, 2003 1:58 PM