Filter
Top Products
UTILITY STITCHES ——————————————————————————————————————————————————————————————————
——
72
The values below “Auto” are set when the pattern is selected. The setting can be adjusted to any value within the range
indicated below “Manual”.
Appliqué stitching
a
Cut out the appliqué, leaving a seam
allowance of between 3 and 5 mm (1/8 and 3/
16 inch).
a Seam allowance
b
Place a pattern made of thick paper on the
back of the appliqué, and then fold over the
seam allowance using an iron.
c
Turn the fabric over, and then baste, glue or
pin it onto the fabric that it will be attached
to.
a Basting stitching
d
Turn on the machine.
e
With the pattern selection dial,
select stitch or .
f
Attach zigzag foot “J”.
• For details, refer to “Replacing the presser
foot” (page 33).
Hand-look
quilting
J17171616
Straight stitch quilting
that looks hand-sewn
0.0
(0)
0.0–7.0
(0–1/4)
2.5
(3/32)
1.0–4.0
(1/16–3/16)
No No
Reinforcement
Quilting
stitch
(for stippling)
J21211717
Quilting background
stitching (stippling)
7.0
(1/4)
1.0–-7.0
(1/16–1/4)
1.6
(1/16)
1.0–4.0
(1/16–3/16)
No No
Reinforcement
●
Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if a
button is accidentally pressed and the machine starts sewing.
Stitch Name
Pattern
Presser Foot
Pattern No.
Application
Stitch Width
[mm (inch)]
Stitch Length
[mm (inch)]
Twin Needle
Walking Foot
Reverse/
Reinforcement
Stitching
70 stitches
model
60 stitches
model
50 stitches
model
40 stitches
model
Auto Manual Auto Manual
*
1
Do not use reverse stitching.
CAUTION
a
a