Filter
Top Products
25
1
d
Raise the presser foot lever, pass the end of
the thread through the presser foot, and then
pull out about 5 cm (2 inches) of thread
toward the rear of the machine.
a 5 cm (2 inches)
X The upper threading is finished.
Now that the upper threading and the
lower threading are finished, you are
ready to begin sewing.
Note
● If the needle is not raised, the needle
threader cannot thread the needle. Be sure
to press (needle position button) to raise
the needle before using the needle threader.
■ For models without the thread guide disk
a
While lowering the needle threader lever,
hook the thread onto the guide.
a Needle threader
b Thread
c Guide
b
Catch the thread on the hook as shown below.
a Needle threader lever
c
Raise the needle threader lever, and then pull
the end of the thread which passed through
the eye of the needle.
d
Raise the presser foot lever, pass the end of
the thread through the presser foot, and then
pull out about 5 cm (2 inches) of thread
toward the rear of the machine.
a 5 cm (2 inches)
X The upper threading is finished.
a
● Be careful not to pull on the thread with force
or it may bend the needle.
a
CAUTION
a