Brother 885-V12/V13 Sewing Machine User Manual


 
9
Needle and presser foot section
a Needle threader lever
Use the needle threader to thread the needle.
b Buttonhole lever
Lower the buttonhole lever when sewing buttonholes
and bar tacks.
c Presser foot holder
The presser foot is attached to the presser foot holder.
d Presser foot holder screw
Use the presser foot holder screw to hold the presser
foot holder in place.
e Presser foot
The presser foot applies pressure to the fabric during
sewing. Attach the appropriate presser foot for the
selected stitch.
f Needle plate cover
Remove the needle plate cover to clean the bobbin case
and race.
g Feed dogs
The feed dogs feed the fabric.
h Quick-set bobbin
Begin sewing without pulling up the bobbin thread.
i Bobbin cover
Remove the bobbin cover and then insert the bobbin
into the bobbin case.
j Needle plate
The needle plate is marked with guides to help sew
straight seams.
k Needle bar thread guide
Pass the upper thread through the needle bar thread
guide.
l Presser foot lever
Raise and lower this lever to raise and lower the presser
foot.
m Needle clamp screw
Use the needle clamp screw to hold the needle in place.