Filter
Top Products
29
1
Checking the needle
Sewing with a bent needle is extremely dangerous
since the needle may break while the machine is
being operated.
Before using the needle, place the flat side of the
needle on a flat surface and check that the distance
between the needle and the flat surface is even.
a Flat side
b Needle type marking
a Flat surface
If the distance between the needle and the flat
surface is not even, the needle is bent. Do not use
a bent needle.
a Flat surface
Replacing the needle
Replace the needle as described below. Use the
screwdriver and a correct needle, as described in
“Checking the needle”.
a
Press (needle position button) once or
twice to raise the needle.
a Needle position button
b
Turn off the sewing machine.
c
Lower the presser foot lever.
a Presser foot lever
a
b
a
a
● Before replacing the needle, be sure to turn
off the sewing machine, otherwise injuries
may occur if the start/stop button is
accidentally pressed and the machine starts
sewing.
● Before replacing the needle, place fabric or
paper under the presser foot to prevent the
needle from falling into the hole in the needle
plate.
CAUTION
a
CAUTION