Filter
Top Products
10
Operation panel
The operation panel, located on the front of the
sewing machine, allows you to select a stitch and
specify how the stitch will be sewn.
a LCD (liquid crystal display)
The number of the selected stitch (
1), the presser foot
to be used (
2), the stitch length (mm) (3), and the
stitch width (mm) (
4) are displayed here.
b Stitch length key (page 40)
Use to adjust the length of the stitch. (Press the “–” side
for a shorter stitch length, or press the “+” side for a
longer stitch length.)
c Stitch width key (page 41)
Use to adjust the width of the stitch. (Press the “–” side
for a more narrow stitch width, or press the “+” side for
a wider stitch width.)
d Automatic reverse/reinforcement stitch key (page 46)
The sewing machine can be set to automatically sew
reverse or reinforcement stitches at the beginning and
end of the stitching.
e Needle mode selection key (single/twin) (page 25)
Press this key to select the twin needle sewing setting.
Each time this key is pressed, the setting switches
between that for single needle sewing and for twin
needle sewing.
Flat bed attachment
The accessories are stored in the storage space in the
flat bed attachment.
a
Swing the lid of the flat bed attachment
toward you to open the storage space.
a Flat bed attachment
b Accessory compartment
X The bag of accessories is in the storage
space.
Note
● Place the accessories in the bag before
storing them in the flat bed attachment. If the
accessories are not placed in the accessory
bag when stored in the flat bed attachment,
accessories may fall out and be lost or
damaged.
a
b