Filter
Top Products
GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
—
20
■ List of stitch or machine attributes
The stitch or machine attributes that can be set are listed below. For details on each attribute, refer to the
corresponding reference page.
Memo
z The icon shown highlighted above is the default setting.
z The default display language is English.
Attribute Icon Details Reference
Check pattern Allows combined patterns to be checked. page 124
Mirror imaging Mirror images patterns along a vertical axis. page 129
Pattern length Adjusts the length of satin stitches. page 127
Pattern size Sets the size of patterns to be large or small. page 125
Repeated/
single sewing
Specifies whether the pattern will be sewn once or
repeatedly.
page 124
Stitching
density
Specifies the sewing density of the stitching. page 126
Initial needle
position
Select the straight stitch that is automatically selected
when the machine is turned on.
-
Stitch width
control
Allows the stitch width to be adjusted with the sewing
speed controller.
page 106
Language
Allows the language used in the screens to be
changed.
page 21
Buzzer
Specifies whether or not a beep is sounded with each
operation.
page 166
LCD brightness Adjusts the brightness of the LCD. page 21
Vertical pattern
adjustment
Adjusts the up and down position of the pattern. page 131
Horizontal
pattern
adjustment
Adjusts the left and right position of the pattern. page 131