Filter
Top Products
8
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
—
Accessories
After opening the box, check that the following accessories are included. If any item is missing or
damaged, contact your dealer.
Included accessories
The following items should also be included in the box.
■ Attaching the stitch pattern plate
The stitch pattern plate shows the stitch numbers and the patterns available with each stitch mode. Attach
the stitch pattern plate to the handle as shown in the illustration below.
Note
(For U.S.A. only)
z Foot controller: Model N5V
This foot controller can be used on this machine model
NX-650/ NX-800.
z The screw for the presser foot holder is available
through your authorized dealer.
(Part code: XA4813-051)
z The organized accessory tray is available through your
authorized dealer.
(Part code: XC4489-051)