Filter
Top Products
Upper Threading 31
1
Using thread that winds off
quickly
When using thread that winds off quickly, such as
transparent nylon thread or metallic thread, place the
enclosed spool net over the spool before placing the
spool of thread onto the spool pin.
If the spool net is too long, fold it to fit the size of the
spool.
1 Spool net
2 Spool
3 Spool cap
4 Spool pin
Pulling up the bobbin thread
When making gathers or before free-motion quilting,
first pull up the bobbin thread as described below.
1
Insert the bobbin into the shuttle.
• Refer to steps
1 through 5 of “Installing the
bobbin” (page 22).
2
Pass the bobbin thread through the slot.
Do not cut the thread with the cutter.
3
While lightly holding the upper thread with
your left hand, press (needle position
button) twice to raise the needle.
1 Needle position button
X The bobbin thread is looped around the
upper thread and can be pulled up.
4
Carefully pull the upper thread upward to pull
out the end of the bobbin thread.
2
1
3
4
1