Filter
Top Products
Decorative Stitching 111
3
Partially removing threads is called “drawnwork”.
This gives a beautiful result with fabrics that have a
loose weave.
Two ways to create drawnwork are described below.
■ Drawnwork (Example 1)
1
Pull out several threads from the fabric.
2
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
foot” (page 37).
3
Select stitch
33
.
• For details, refer to “Selecting stitching”
(page 68).
4
With the right side of the fabric facing up, sew
along the right edge of the frayed section.
5
Press (settings key) in the operation panel.
X The settings screen appears.
6
Press , , and (arrow keys) until
is selected.
7
Press (OK key).
X The screen for mirror imaging the pattern
appears.
8
Press to select .
To return to , press .
X The pattern is flipped.
9
Press (OK key).
X The initial stitch screen appears again.
0
Sew along the other edge of the frayed section
so that it looks like the previous stitching.
a
Set the mirror image pattern setting back to
.
N
N