Filter
Top Products
Changing the Machine Settings 15
1
■ List of stitch or machine attribute
The stitch or machine attribute that can be set are listed below. For details on each attribute, refer to the
corresponding reference page.
Attribute Icon Details Reference
Automatic
reverse/
reinforcement
stitching
Specifies automatic reverse/reinforcement stitching. page 57
Automatic
thread-
cutting
Specifies automatic thread-cutting. page 59
Check
pattern
Allows combined patterns to be checked. page 116
Left/right
mirror
imaging
Mirror images patterns along a vertical axis. page 119
Pattern
length
Adjusts the length of satin stitches. page 118
Pattern size Sets the size of patterns to be large or small. page 117
Repeated/
single sewing
Specifies whether the pattern will be sewn once or
repeatedly.
page 115
Stitching
density
Specifies the sewing density of the stitching. page 118
Save settings
Allows adjusted pattern widths and lengths to be
saved.
page 60
Needle
position
Specifies where the needle is positioned when the
sewing machine is stopped.
page 16
Twin needle
sewing
Specifies the twin needle. page 28
Stitch width
control
Allows the stitch width to be adjusted with the
sewing speed controller.
page 98
Language
Allows the language used in the screens to be
changed.
page 17
Buzzer
Specifies whether or not a beep is sounded with
each operation.
page 143
LCD
brightness
Adjusts the brightness of the LCD. page 16
Vertical
pattern
adjustment
Adjusts the up and down position of the pattern. page 121