Brother 882-C50 Sewing Machine User Manual


 
STITCH SETTINGS
Sewing Basics
Sewing S-11
S
1
Example:
Press to shorten the stitch length.
The value in the display gets smaller.
Press to lengthen the stitch length.
The value in the display gets bigger.
Setting the “L/R SHIFT”
Follow the steps below when you want to change
the placement of the zigzag stitch pattern by
moving it left and right.
Example:
Press to shift the pattern to the left.
The value in the display appears with a minus sign.
Press to shift the pattern to the right side of the
left needle position.
The value in the display appears with a plus sign.
Memo
Press to check changes made to the
stitch.
Press after pressing to return to the
original setting.
CAUTION
If the stitches get bunched together, lengthen
the stitch length and continue sewing. Do not
continue sewing without lengthening the stitch
length. Otherwise, the needle may break and
cause injury.
Memo
Press after pressing to return to the
original setting.
Note
After adjusting the “L/R SHIFT”, slowly
rotate the handwheel toward you
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the needle
may bend or break.