Brother 882-C50 Sewing Machine User Manual


 
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
B-14
*1 75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point needle (gold colored)
*2 2.0/11 needle
*3 75/11 2 needles:
Ball point needle for embroidery
HAX130EBBR
No. Part Name
Part Code
Americas Others
1 Zigzag foot “J” (on machine) XF3022-001
2 Monogramming foot “N” X53840-351
3 Overcasting foot “G” XC3098-051
4 Zipper foot “I” X59370-051
5 Buttonhole foot “A” X57789-251
6 Blind stitch foot “R” X56409-051
7 Button fitting foot “M” 130489-001
8 Embroidery foot “W” XF4012-001
9 Free motion open toe quilting
foot “O”
XF4873-001
10 Adapter XF3613-001
11 Screw (small) XA4813-051
12
Needle set
*1
X58358-051
13
Twin needle
*2
X59296-151
14
Ball point needle set
*3
XD0705-051
15 Bobbin × 10
(One is on machine.)
SA156 SFB:
XA5539-151
16 Seam ripper XF4967-001
17 Scissors XC1807-121
18 Cleaning brush X59476-051
19 Eyelet punch XZ5051-001
20 Screwdriver (small) X55468-051
21 Screwdriver (large) XC4237-021
22 Disc-shaped screwdriver XC1074-051
23 Vertical spool pin XC8619-052
24 Spool cap (small) 130013-154
25 Spool cap (medium) × 2
(One is on machine.)
X55260-153
26 Spool cap (large) 130012-054
27 Spool cap (special) XA5752-121
28 Bobbin clip × 10 XE3060-001
29 Spool felt (on machine) X57045-051
30 Spool net × 2 XA5523-050
31 Embroidery needle plate
cover
XE5131-001
32 Touch pen (stylus) XA9940-051
33 Knee lifter XA6941-052
34 USB cable XD0745-051
35 Alternate bobbin case
(no color on the screw)
XC8167-551
36 Bobbin case (gray, for bobbin
work)
XE8298-001
37 Cord guide bobbin cover
(with single hole)
XE8991-101
38 Bobbin cover (with mark) XF0750-101
39 Bobbin cover (on machine) XE8992-101
40 Foot controller XD0501-151(EU area)
XC8816-051 (other area)
41 Embroidery frame set
(extra large)
H 30 cm × W 18 cm
(H 12 inches × W 7 inches)
SA440 EF76:
XC8482-152
42 Embroidery bobbin thread SA-EBT XC6283-001
43 Stabilizer material SA519 BM3:
XE0806-001
44 Grid sheet set SA507 GS3:
X81277-151
45 Chalk pencil XE8568-001
46 Dust cover VM5100 : XF4569-001
V5 : XF4113-001
47 Accessory bag XC4487-021
48 Operation manual This manual
49 Quick Reference Guide XF6503-001 XF3617-001
Memo
Foot controller: Model T
This foot controller can be used on the
machine with product code 882-C50. The
product code is mentioned on the machine
rating plate.
Always use accessories recommended for
this machine.
Placing bobbin clips on bobbins helps
prevent the thread from unwinding from the
bobbin. In addition, snapping bobbin clips
together allows the bobbins to be
conveniently stored and prevents them from
rolling around if they are dropped.