Filter
Top Products
7. SEWING
BAS-341F, 342F
28
5. Step on the presser lifter switch (2) to raise the presser
foot.
6. Insert the work piece under the work clamp, and press
the presser lifter switch (2) to lower the clamp.
7. Press the starting pedal (1).
Note
The work clamp will return to the origin, and will
then advance to the sewing start position and
blinking will stop. This is only required the first
time a program is sewing.
8. Press the starting pedal (1) again to start sewing.
After sewing is completed, the thread cutter will
automatically operate, then the work clamp will rise.
Note
When the power is turned on after once being turned off, the same pattern of sewing can be continued since the
machine will stores the sewing data from the last time.
1942S