Filter
Top Products
SERVICE PROCEDURE PDV24-V
Main Burner & Pilot
Removal and Inspection
WARNING
Water Heater components may be HOT when performing the following steps in this
procedure. Take necessary precaution to prevent personal injury.
Step 7: Remove manifold bracket screws
Step 8: Remove manifold from Burners
Step 9: Slide manifold out through side
flange opening in Burner Box
Step 10: Disconnect Pilot Tube Fitting
from inside Burner Box
Step 11: Remove screw fastening burner
to burner box/burner shroud.
Step 12: Disconnect Pilot wires from
control board and remove from Control
Box
PDV-S MODELS
PDV-T MODELS
36
PDV (S&T) MODELS