Filter
Top Products
SERVICE PROCEDURE PDV24-VI
Control Board Replacement
Control board replacement
Step 1. Depress left plastic tabs and
pull out from slots in control panel
Step 2. Tilt control panel to the
right and slide control hook tabs
from slots in control panel.
Depress
plastic
tabs
Slots in
control panel
Unhook tabs
from control
panel slots
Remove lower sensor
Remove clip, pull sensor out.
Step 3. Unplug wire connections from board and replace.
Pull out sensor
Remove clip
Wire connections
DANGER
120 volt exposure. To avoid personal injury,
unplug while performing this procedure.
40