Filter
Top Products
Condition:
Error code 57: Flame Rod Shorted
to Ground
Disconnect power. Shut off gas
supply to water heater. Slide out
burner assembly. See section on
removing pilot and main burner
assembly.
SERVICE PROCEDURE PDV24-III
Pilot Operation Testing
Check to see if pilot shield is touching
pilot flame sensor or flame sensor
touching pilot hood. Bend shield to
prevent interference.
Check pilot flame sense wire for
broken insulation. Replace pilot if
defective
Reinstall pilot and burner assembly.
Reconnect gas line union, turn on
gas. Reconnect power and verify
proper ignitions.
Make sure pilot shield
clears flame sense rod
31