Filter
Top Products
VIP X2 | Installation and Operating Manual EN | 57
Bosch Security Systems | 2006-12 | V2.5 Configuration using a Web browser
Creating a partition
Note
The maximum number of partitions is predefined and corresponds to the
number of video inputs on the actual unit.
Creating a new partition is performed using separate windows in which informa-
tion is presented to you and you are led step by step through the necessary set-
tings.
The process must be completed for each partition to be set up on the hard drive.
After startup, you can select the total number of partitions to be set up. The setup
process is then started as often as is necessary to configure all partitions.
Note
You can create multiple partitions of the same type in one process. To do
this, check the box Apply same settings for all new partitions in the first
window.
– Click the Create partition button to start the assistant for creating partitions.
The first window appears.
– You should always first read the information text in the upper section of the
window.