Filter
Top Products
VIP X2 | Installation and Operating Manual EN | 111
Bosch Security Systems | 2006-12 | V2.5 Operation
Selecting recordings
In the left section of the page, first select the partition whose recordings you want
to view.
All sequences that are saved in the partition are displayed in the list. A running
number (track) is assigned to each sequence. Start time and stop time, record-
ing duration, number of alarms, and recording type are displayed.
– Click a partition name from the list to display the recordings for this partition.
– Click a list entry. The playback for the selected sequence starts immediately
in the video window.
Controlling a playback
You will see a time bar below the video image for quick orientation. If a particular
sequence has been selected for playback by means of click, the selected
sequence appears in the list in blue with a green border. The associated time
interval is displayed in the bar in gray. A green arrow above the bar indicates the
position of the image currently being played back within the sequence.
The time bar offers various options for navigation in and between sequences.
– You can change the time interval displayed by moving the gray area to the
left or right while holding down the mouse button.
– You can change the time interval displayed by clicking the zoom keys (mag-
nifying glass icons). The display can span a range from two months to a few
seconds.
– You can select a different sequence for playback by clicking on the corre-
sponding gray marking.