Filter
Top Products
EN | 56 Installation and Operating Manual | VIP X2
Configuration using a Web browser Bosch Security Systems | 2006-12 | V2.5
Partitioning
Two partitions can be set up for recordings of the cameras connected to
the VIP X2, in a similar manner to the partitioning often found on computer hard
drives. Parameters such as size, quality and type of video recording or compres-
sion standard used can be specified for each partition. Modifying these param-
eters leads to reorganization, during which stored data is lost.
The unit requires a dedicated partition for the recordings of each connected
camera. Each partition is linked to its own encoder or camera input: camera
input Video In 1 with partition number 01, camera input Video In 2 with
partition 02. This assignment cannot be modified. As a result, all numbers are
always displayed in the list, regardless of whether a corresponding partition is
available or has been deleted. Both potential partitions need to be configured in
order to record two cameras. Two partitions are already pre-configured in the
default configuration.
All partitions are listed in the table on the page Partitioning together with the
number of the video input (Camera), their partition name, alarm tracks, type and
size.
In addition, the page provides you with an overview of the drive data; for exam-
ple total memory and number of partitions created. A pie chart indicates how
much memory space is partitioned for recordings.