Filter
Top Products
VIP X2 | Installation and Operating Manual EN | 105
Bosch Security Systems | 2006-12 | V2.5 Operation
The LIVEPAGE
Once the connection is established, the Web browser displays the LIVEPAGE.
It shows the live video image on the right of the browser window. Depending on
the configuration, various text overlays may be visible on the live video image
(see Display stamping, page 37).
Other information may be shown next to the live video image on the LIVEPAGE.
What is shown will depend on the settings you have made on the Livepage con-
figuration screen (see page 94).
Maximum number of connections
If you do not connect, the device may have reached its maximum number of con-
nections. Depending on the device and network configuration, up to 25 Web
browser, or up to 50 VIDOS or Bosch Video Management System connections
are supported.
Protected VIP X2
If the VIP X2 is password protected against unauthorized access, the Web
browser displays a corresponding message and prompts you to enter the pass-
word when you attempt to access protected areas.
Note
The VIP X2 offers the option to limit the extent of access using various au-
thorization levels (see page 32).
– Enter the user name and password in the corresponding text fields.
– Click OK. If the password is entered correctly, the Web browser displays the
page called up.
Image selection
You can view the image from each camera individually on a full screen. It is also
possible to display the camera images from both video inputs side by side (Dual
Video).
– Click one of the tabs above the video image to view one or both of the camera
images.
– Click one of the tabs MPEG-4 Stream 1, MPEG-4 Stream 2 or M-JPEG
below the video image to toggle between the different displays of the camera
images. This selection applies to both camera images.