Filter
Top Products
SC & SI Remote Interface Description en | 3
Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description
1 Introduction
1.1 Purpose
The purpose of this document is to describe the remote interface for system configuration and system
installation. The document specifies the interface between the CCU and third party software.
1.2 Scope
This document describes the remote interface for system configuration and system installation. It is meant for
developers who want to use this remote interface to control/access system configuration and system
installation, present in the CCU, remotely.
For a complete description of the System Set-up can be referred to [SRS_INF].
1.3 Definitions, Acronyms and Abbreviations
CCU Central Control Unit. This can be either a Single-CCU system or a
Multi-CCU system.
DCN Digital Congress Network
SC System Configuration
SI System Installation
DQS Database Query Services
OMF File An executable file in a special format that can be programmed or
downloaded into the ReadOnlyMemory on the CCU
TCB Trunc Communication Board
MTB Multi Trunc Board
UnitId Unit identification, also called unit-number. A unique identification of
a unit within the CCU system.
remote controller Device (e.g. PC) connected to the CCU which remotely controls a
part of the applications present in the CCU.
1.4 References
[SRS_INF] General Remote Interface Description
[USERDOC_DB] User Manual LBB 3580
[USERDOC_SI] User Manual LBB 3585
This document must be referenced as [SRS_SCSIINF].
1.5 Overview
Chapter 2 gives a brief explanation on System Configuration and System Installation. Also a short description
of the different CCU system modes is given in this chapter. For system configuration, the remote functions
and update notifications are described in chapters 3 and 4. For system installation, the remote functions and
update notifications are described in chapters 5 and 6.
Appendix Appendix A gives an overview of the constants used in combination with the remote functions and
update notifications described in this document.
Appendix Appendix B gives an overview of the possible error’s that could be returned upon execution of a
remote function.
Appendix Appendix C shows some examples on typical System Configuration or System Installation topics.