Filter
Top Products
SC & SI Remote Interface Description en | 26
Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description
Database Query Services Error code Value
Explanation
The use of function SC_C_CCU_APPLY_ONE is not possible,
because currently there is no database present in the CCU.
DQSE_APP_NOT_STARTED
10411
The remote controller has not called the SC_C_START_DQS yet.
Therefore any remote function call to access the database fails with
this error.
DQSE_INCONTROL_THIS_CHANNEL
10412
The database is already under control by this remote controller (on
the same channel). Probably you have called the
SC_C_START_DQS function twice.
DQSE_INCONTROL_OTHER_CHANNEL
10413
The SC_C_START_DQS function could not finish successfully
because the database is already controlled by another remote
controller using another channel.
DQSE_ILLEGAL_CONTROL_TYPE
10414
The control-type passed to the function SC_C_START_DQS is not
within range of valid values (see appendix Appendix A for the
correct control-type values).