Filter
Top Products
98 en | Interfaces Camera Browser Interface
AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems
13.3 COM1
(only for cameras with a data connector)
13.3.1 Serial port function
Select a controllable unit from the list. If you wish to use the
serial port to transmit transparent data, select Transparent.
Select Terminal if you wish to operate the unit from a terminal.
After selecting a unit, the remaining parameters in the window
are set automatically and should not be changed.
13.3.2 Camera ID
If necessary, enter the ID of the peripheral you wish to control
(for example a dome camera or pan/tilt head).
13.3.3 Baud rate
Select the value for the transmission rate in bps.
13.3.4 Data bits
The number of data bits per character cannot be changed.
13.3.5 Stop bits
Select the number of stop bits per character.
13.3.6 Parity check
Select the type of parity check.
13.3.7 Interface mode
Select the desired protocol for the serial interface.