Filter
Top Products
Camera Browser Interface Operation via the browser | en 23
Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01
3.2.2 Exporting tracks
1. Select a track in the track list.
2. Click the export tab.
3. The start and stop time are filled-in for the selected track.
If required, change the times.
4. Select a target.
5. Select the original or a condensed speed.
6. Click the save icon .
Note:
The target server address is set on the Network/Accounts
page.
3.2.3 Searching for tracks
1. Click the search tab.
2. Select a search mode; Any motion, Line crossing, Field or
Recorded alarms.
3. To limit the search to a particular time range, enter the
start and stop times.
4. Click Start Search.
The results are shown in the search results tab.
5. Click a result to play it back.
6. Click the search tab to enter a new search.