Filter
Top Products
74 en | Recording Camera Browser Interface
AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems
10.2.3 Alarm recording
Select a period for the Pre-alarm time from the list box.
Select a period for the Post-alarm time from the list box.
Alarm stream
Select the stream to be used for alarm recordings:
– Stream 1
– Stream 2
– I-frames only
Check the encoding interval and bit rates from profile: box
and select an encoder profile to set the associated encoding
interval for alarm recording.
Check the Export to account box to send standard H.264 files
to the target whose address is displayed.
If an target has not yet been defined, click Configure accounts
to jump to the Accounts page where the server information can
be entered.
Alarm triggers
Select the alarm type that is to trigger an alarm recording:
– Alarm input
– Analysis alarm
– Video loss alarm
Select the Virtual alarm sensors that are to trigger a recording,
via RCP+ commands or alarm scripts, for example.
10.3 Retention Time
Recordings are overwritten when the retention time entered
here has expired.
Enter the required retention time in hours or days for each
recording track.
Make sure that the retention time does not exceed the available
recording capacity.