Filter
Top Products
46 en | Camera Camera Browser Interface
AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems
8.3 Mode menu
A mode is a set of image parameters that are set in the camera
when that mode is selected (Installer menu settings are
excluded). Six pre-defined modes are available for typical
scenarios. After a mode has been selected, additional changes
can be made through the user interface.
8.3.1 Current mode
Select the mode you wish to use from the drop-down menu.
8.3.2 Mode ID
The name of the selected mode is displayed.
8.3.3 Copy mode to
Select the mode from the drop-down menu to which you wish
to copy the active user mode.
8.3.4 Restore Mode Defaults
Click Restore Mode Defaults to restore the factory default
modes. Confirm you decision.
The six factory default modes are as follows:
Indoor
This mode covers most indoor situations. It is similar to the
outdoor mode but it avoids the limitations imposed by the sun
or street lighting.
Outdoor
This mode covers most outdoor situations. It should be used in
applications where the lighting changes from day to night. It
takes into account sun highlights and street lighting.
Motion
This mode is used for monitoring the traffic movement on roads
or parking lots. It can also be used for industrial applications
where fast moving objects are to be monitored. Motion artifacts
are minimized. This mode should be optimized for a sharp and
detailed picture in colour and black/white mode.