Filter
Top Products
3Bosch | 09/04 | 74-06200-000-F
D2071A | Operations & Installation Guide | FCC Notice
FCC Notice
The D2071A Fire Alarm Control Panel (FACP)
generates, uses, and can radiate radio frequency energy.
If this device is not installed according to the
manufacturer’s instructions, it can cause interference to
radio communications. The D2071A was tested and
complies with the specifications in Subpart J of Part 15
of Federal Communications Commission (FCC) Rules
for Class “B” Computing Devices.
If the D2071A interferes with radio or television
reception, determined by turning the radio or television
on and off, correct the interference by one or more of
the following:
• Reorient the radio or television antenna.
• Connect the AC transformer to a different outlet so
the D2071A and radio or television are on different
branch circuits.
• Relocate the D2071A with respect to the radio or
television.
If necessary, consult an experienced radio and television
technician for additional suggestions on correcting
interference. You can also send for the FCC’s Interference
Handbook (stock no. 004-000-00450-7) at:
U.S. Government Printing Office
Washington D.C. 20402
The D2071A Control Panel is registered with the FCC
under Part 68 for connection to the public telephone
network using an RJ31X or RJ38X jack installed by
your local telephone company.
FCC Registration Number: AJ9USA-61104-AL-E
Ringer Equivalence: 0.0B (AC); 1.3B (DC)
Figures
Figure 1: D2071A Control Panel .................................... 7
Figure 2: Stand-Alone Installation ................................... 8
Figure 3: Slave Communicator Installation .................. 9
Figure 4: Mode 1 Class “B” Wiring..............................11
Figure 5: Mode 2 Class “B” Wiring..............................11
Figure 6: Mode 3 Class “B” Wiring..............................12
Figure 7: Relay Sockets ..................................................13
Figure 8: RJ31X Wiring....................................................15
Figure 9: Inserting Cable Tie .......................................... 17
Figure 10: Securing Cable Tie and Wires .................... 17
Figure 11: Program 2071 Navigation .............................18
Tables
Table 1: Required Materials.............................................. 5
Table 2: Mandatory Connections for the NFPA 72
Central Station and Remote Station ............. 5
Table 3: D2071A Dimensions .......................................... 6
Table 4: 24 VDC Battery Discharge and
Recharge Schedule..........................................14
Table 5: 12 VDC Battery Discharge and
Recharge Schedule..........................................15
Table 6: Call Routing Assignments...............................16
Table 7: Function Keys.....................................................19
Table 8: Tones .....................................................................19
Table 9: Special Dialing Characters ............................21
Table 10: Receiver Reports.............................................. 23
Table 11: Communications Failures............................... 24
Table 12: Zone Problems .................................................. 26
Table 13: Specifications ................................................... 27