Filter
Top Products
Bosch | 09/04 | 74-06200-000-F18
D2071A | Operations & Installation Guide |
3.0 Programming
The information in this section is not intended to be a substitute for the D5200 Programmer Operation
Manual (P/N: 74-06176-000). Become familiar with the D5200 Programmer Operation Manual before
programming any Bosch product.
When programming the D2071A DACT with the D5200 Programmer, ensure the programmer has the 2071 Product
Handler Program. Refer to the
D5200 Programmer Operation Manual for the updated D5200 instructions.
3.1 Navigating Handler and Program Records
Access program items by navigating the programmer groups.
• Use the red [ENTER GROUP] and [EXIT GROUP] keys to move in and out of each group (Figure 11).
• Use the red [↑] and [↓] keys to scroll through the list of items at each group. Scroll through a list of available
product handlers at the Product Handler Group. See the saved record titles at the Record Group. Program items
are at the Program Item Group.
• Use the red [←] and [→] keys to move the cursor horizontally within one line of the LCD.
Figure 11 is an example of using the navigational keys to move through the D2071 Program. Use these keys the
same way for all product handlers.
3.0 Programming
2071 [##.##]
NEWRECORD
RECORD1
RECORD2
RECORD3
DELETE
COPY
VISMODE
LOCKRECORD
Account #
Transmit BFSK No
DTMF Dialing Yes
PriPre
PriPh#
AltPre
AltPh#
12 Volt Mode Yes
Class B Mode 3
Retard Time 0
Reset Time 0
Hrs Til Rpt 0
Mins Til Rpt 0
ENTER
ENTER
GROUP
4112
7112
6112
636
2071
8112
DISKSTAT
SECURITY
UPDATE
DELETE
5200 OFF
EXIT
GROUP
ENTER
GROUP
EXIT
GROUP
3
2
1
4
5
Figure 11: Program 2071 Navigation
1 - Password display 4 - Record level
2 - Program, company, revision, password entry display 5 - Program item level
3 - Product handler level