Filter
Top Products
22
BISSELL Customer Service
Troubleshooting Continued
Cleaner not picking up solution.
Possible Causes Remedies
Ready Tools dial may be at the Set ReadyTools dial to either Tools or
wrong setting for the cleaning job. PreTreat or Floor Cleaning.
Nozzle Window may not be Press down firmly on the black oval
properly attached. gasket at the top window to make sure
the two tabs on the back of the Nozzle
Window are snapped into the mating
slots in the main housing.
Tank-in-Tank lid is not Re-install lid; refer to the Features
properly installed. section.
Tank-in-Tank is not properly seated. Tank-In-Tank must be firmly seated to
function; remove and reseat Tank-in-Tank.
Poor tool position. Adjust angle; apply more downward
(Hand held attachments only). pressure.
Tank-in-Tank has picked up Empty Tank-in-Tank, refer to
maximum dirty water. the Features section.
For information about repairs or replacement parts, or questions about
your warranty, call:
BISSELL Customer Service
1-800-263-2535
Monday - Friday 8 a.m. - 4:30 p.m. EST
Or write:
BISSELL Ltd.,
Box 1003
Niagara Falls, Ont.,
L2E 6W2
ATTN: Customer Service
Or visit the BISSELL Web Site - www.bissell.com
E-mail us at: canada.custhelp@bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of
purchase in the event of a warranty claim. See "About Your Warranty"
on page 24 for details.
Please do not return this product to the store.