Filter
Top Products
www.bissell.com 800.237.7691
Maintenance and care
www.bissell.com 800.237.7691
16
1.
3.
5.
6.
Cleaning the upper tank
1. Grasp the inner cyclone and twist to
the left until the locking tabs stop the
rotation. Pull down from the upper tank
to remove it.
2. Wipe out the inside of the upper tank
and the inner cyclone with a damp
cloth moistened with water or a mild
cleaning solution.
3. If you desire to thoroughly clean the
filtration disk located in the upper
portion of the inner cyclone, hold the
bottom of the cyclone and turn filtration
disk to the right and pull up to remove.
4. The inner cyclone and filtration disk
may be washed using a mild detergent.
Be sure it is completely dry before
reassembling or damage to your unit
may result.
5. Once cleaning is completed, reassemble
the filtration disk over the inner cyclone
by sliding it straight down on the top
of the inner cyclone and turning left.
Be sure to line up the tabs when
reassembling for proper installation.
6. To replace the inner cyclone, slide it
into the upper housing. Be sure to line
up the inner cyclone by ensuring tabs
on filtration disk are positioned toward
the front of the unit. Push the inner
cyclone in and rotate it to the right
until the locking tabs stop the rotation.