Filter
Top Products
www.bissell.com 800.237.7691
15
Maintenance and care
5.
2.
Clearing clogs
Low suction or poor pickup may be due
to a clog in the vacuum cleaner. If you
notice a change in the sound of the motor,
check for clogs.
1. Unplug the vacuum from electrical outlet.
2. Empty dirt container.
3. Check upper tank for build up or clogs.
4. If you notice a clog in the upper tank,
remove the inner cyclone (see section
"Cleaning the upper tank" on page 16).
5. Grasp the Hose Cuff and separate it
from the Hose Base. Check for a clog in
the base or the hose.
6. Remove the Twist ‘n Snap hose from the
vacuum by turning to the left. Straighten
the hose and unclog with a long,
narrow object such as a broom handle.
7. If the clog persists, follow the instructions
for "Checking the rotating floor brush
and drive belt" on page 12 and inspect
the air passageway for obstructions.