www.bissell.com 800.237.7691
Maintenance and care
14
2.
4.
5.
Maintaining Pet TurboBrush
Tool
The Pet TurboBrush Tool should be checked
regularly for clogs or debris wrapping
around the brush.
1. Remove tool from hose or front of vacuum.
2. Twist collar so opening is at the top and
lift top cover to remove.
3. Remove the brush from the belt and
clean debris.
4. Replace the brush inside the belt and
place ends into slots on sides as shown.
5. Reposition top cover making sure to line
up inside tab at the front with the opening
on the cover. Twist collar until opening is
at the bottom to lock into place.