3
CF375 Burner Manual
Agency approvals
UL listed to comply with ANSI/UL296 and certifi ed to
CSA B140.0.
Accepted by N.Y.C. M.E.A.
Other approvals may be available and must be
specifi ed at time of order.
○
○
○
Specifi cations
Fuels
DO NOT USE GASOLINE,
CRANKCASE OIL, OR
ANY OIL CONTAINING
GASOLINE
U.S. #1 or #2 Fuel Oil only
(ASTM D396)
Canada #1 Stove Oil or #2
Furnace Oil only
Firing range 1.65 to 3.75 GPH
Motor
1/7 HP 3450 RPM
120/60 hz standard
1.7 amps @ 120 VAC
Ignition Trans. 120V/12,000V
Housing Cast aluminum
Fuel unit 100 - 200 PSIG
Oil nozzle 45° - 70° solid
Shipping wt. 25 lbs.
General Information
Section: General Information
Hazard Defi nitions
Within the boundaries of the hazard warning, there will
be information presented describing consequences if the
warning is not heeded and instructions on how to avoid
the hazard.
Indicates a hazardous situation,
which, if not avoided, will result
in death or serious injury.
Indicates a hazardous situation,
which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation,
which, if not avoided, could
result in minor or moderate injury.
Intended to bring special attention
to information, but not related to
personal injury or property damage.
THE INSTALLATION OF
A BURNER SHALL BE IN
ACCORDANCE WITH THE REGULATIONS OF
AUTHORITIES HAVING JURISDICTION