Filter
Top Products
R5976255
A
TLAS
CS4 (2001-03)
10-8
10.7 BARCO logo
The BARCO logo can be added to the image, in overlay or on a background, on any place on the
screen.
To add the BARCO logo or to change a setting in the
BARCO logo menu
:
! Push the cursor key
up
or
down
to highlight
'BARCO logo'
.
! Press
ENTER
to display the
BARCO logo menu
. The actual settings will be displayed.
Within this menu, three toggle settings and a shift control are available.
STATUS [ON/OFF] ON
: BARCO logo will be displayed on the screen.
OFF
: No BARCO logo displayed on the screen.
BACKGROUND [ON/OFF] ON
: BARCO logo will be displayed on a black background.
OFF
: BARCO logo will be displayed without any back-
ground.
SHIFT
By pushing the cursor key
up
,
down
,
left
or
right
, the-
BARCO logo can be positioned anywhere on the screen.
HOT KEY [TEXT/OFF] OFF
: no key on the
RCU
is used to display the BARCO logo
TEXT
: the
TEXT
key on the
RCU
is used to display or to re-
move the BARCO logo with one single push on this key
(only in operational mode)..