Filter
Top Products
R5976255
A
TLAS
CS4 (2001-03)
9-2
9.1 Input Slots
The input configuration of the variable inputs is shown in the
input slots menu
. To view or to
change the input configuration:
! Push the cursor key
up
or
down
to highlight
'Input Slots'
.
! Press
ENTER
to select.
The internal system will scan the input slots and displays the result in the
Input slots menu
.
The black indicated inputs are selectable and changeable. The gray indicated inputs are fix in-
puts and are not changeable.
indication in front of the digit meaning
x
valid signal connected to the input.
-
no valid signal connected to the input.
indication in the source description meaning
Video
or
S-Video
Video
S-Video
RGB analog
RGB-CV:
separate sync is composite video signal on H/C input
RGB-HS&VS
separate sync is horizontal and vertical sync
RGB-CS
separate sync is composite sync
RGB-SOG
sync on green
Component video
Component Video
If a RCVDS (switched on) or VS05 is connected to the projector, it will be also indicated on the
menu
by adding
+800 peripheral
. If no
800 peripheral indication
is made on the
menu
, there are
still two possibilities :
! no RCVDS or VS05 connected or
! RCVDS is switched off.
When a
800 peripheral
is connected to the projector, the input slots are not accessible with the cur-
sor key to toggle their function.