Filter
Top Products
30 Maintenance
© Travis Industries 4080725 100-01154
Weekly Maintenance (or every 5 bags of pellets)
Flyash Removal
This heater was designed to allow for easy flyash removal with the included tools. However, to ease
maintenance, several pellet stove owners have purchased vacuums specifically made to remove
flyash. Furthermore, some of these vacuums are heat-resistant to allow for flyash removal while it is still
warm. Do not use a standard vacuum on this appliance (except to clean the pellet dust out
of the hopper). Standard vacuums may spread the fine particles inside the flyash into the home and
are not heat-resistant (hot flyash may cause the internal portion of vacuums to ignite).
Clean the Hopper
Run the stove until the pellets run out. Open the hopper and remove the dust and debris near the
bottom of the hopper.
Clean the Heat Exchange Tubes
Heat Exchanger
Cleaning Rod
Keep the door closed so the
flyash does not enter the room.
WARNING:
The front edge of the
hopper lid becomes very
hot, do not touch the area
below the handle.
Open the hopper lid.
Store the scraper
rod tool by hanging
it on the hanger on
the back of the
stove.
With the door closed, insert the included
tool into the hole on the heat exchanger
cleaning rod. Move the heat exchange
cleaner up and down several times.