Filter
Top Products
6 Features & Specifications
Travis Industries 100-01140 4020628
Installation Options:
• Freestanding
• Freestanding in an Alcove
• Freestanding in a Mobile Home
• Masonry Fireplace Insert
• Factory-Built (Z.C.) Fireplace Insert
Features:
• EPA Phase II Approved
• 1.8 Cubic Foot Firebox Volume
• Single Operating Control
• Accepts Logs Up to 20" Long
• Steel Plate Construction (1/4" & 3/16")
• Heavy Duty Refractory Firebrick
• Optional High-Tech Blower
Heating Specifications:
Approximate Maximum Heating Capacity (in square feet)* 800 to 1,800
Maximum BTU's per Hour (Cord Wood Calculation) 71,800
Overall Efficiency (Oregon Method) 71.7 %
Maximum Burn Time Up to 9 Hours
* Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature. It is also affected by the quality and moisture level of the fuel.
Dimensions:
Insert Dimensions - Rainier 90
Depth into Fireplace** ........14-1/2"
Onto Hearth**** ....................5-1/8"
Insert Dimensions - Rainier 45
Depth into Fireplace** ...........9-1/2"
Onto Hearth**** .......................10"
25-3/4" ****
Note:
Measure side, corner,
and back clearances
from the stove top.
4-1/4"
21 1/8"*
19-3/8"
Height:
Steel Legs (discontinued)..27-5/8"
Sculptured or Cast Legs..........29"
Pedestal............................32-3/8"
The flue collar protrudes
3/4" above the stove top
3-5/8"
19-1/8"
(from base)
Flue Location for Rainier-45
* For inserts, add 3/4" for the flue collar.
** ZC (metal) fireplaces require an additional 1".
*** ZC (metal) fireplaces require an additional 2".
**** Does not include hearth protection.
Emissions:
2.0 Grams Per Hour (EPA Phase II Approved) – Tests conducted by E.E.S.P.C.