Filter
Top Products
32 Maintaining Your Appliance
© Travis Industries 100-01190_000 4070326
Firebox Parts
4
2
1
1
7
9
6
3
5
8
7
ID # Description Qty Part # ID # Description Qty Part #
1 Side Brick 2 250-00139 2 Combustion Brick 1 250-00141
3 Interram Gasket 1 250-00294 4 Back Brick 1 250-00140
5 Firebox Back 1 6 Combustor 1 250-00247
7 Brick Clips with Bolts 1 250-00144 8 Combustion Brick Gasket 1
9 Firebox Back Screw 4 3
Brick Removal & Replacement
Do not pry brick - they chip and crack easily. Remove the clips holding the side brick in place.
Remove the side brick. Remove the clip holding the back brick in place. Lift the back brick up and
remove. Remove the gasket on top of the combustion brick. Remove the combustion brick.
Combustor Removal & Replacement
Remove the bricks first. Remove the rear heat shield (the screws holding the firebox back are held in
place with nuts accessible from the back of the stove). Remove the firebox back (use a wrench to secure
the nuts on the back of the stove will un-screwing the 4 screws holding the firebox back in place).
Remove the bypass assembly (two nuts and two bolts hold it in place – take care when removing to
prevent damage). Slide the combustor forward to remove.