Ariston E-COMBI 24 30 38 Boiler User Manual


 
overview
4
Advice for the installer
The installation and  rst ignition of the boiler must be
performed by quali ed personnel in compliance with current
national regulations regarding installation, and in conformity
with any requirements established by local authorities and public
health organisations.
After the boiler has been installed, the installer must ensure
that the end user receives the declaration of conformity and the
operating manual, and should provide all necessary information
as to how the boiler and the safety devices should be handled.
This appliance is designed to produce central heating hot water for
domestic use only.
It should be connected to a heating system and a distribution network
for domestic hot water, both of which must be compatible with its
performance and power levels.
The use of the appliance for purposes other than those speci ed is
strictly forbidden. The manufacturer cannot be held responsible for
any damage caused by improper, incorrect and unreasonable use of
the appliance or by the failure to comply with the instructions given
in this manual.
Installation, maintenance and all other interventions must be carried
out in full conformity with the governing legal regulations and the
instructions provided by the manufacturer. Incorrect installation
can harm persons, animals and possessions; the manufacturing
company shall not be held responsible for any damage caused as a
result. The boiler is delivered in a carton. Once you have removed all
the packaging, make sure the appliance is intact and that no parts are
missing. If this is not the case, please contact your supplier.
Keep all packaging material (clips, plastic bags, polystyrene foam, etc.)
out of reach of children as it may present a potential hazard.
In the event of a fault and/or malfunction, turn the appliance o , turn
o the gas cock and do not attempt to repair it yourself. Contact a
quali ed professional instead.
Before any maintenance or repair work is performed on the boiler,
make sure you have disconnected it from the electricity supply
by switching the external bipolar switch to the “OFF” position and
removing the fuse.
All repairs, which should only be performed using original spare parts,
should be carried out by a quali ed professional. Failure to comply
with the above instructions could compromise the safety of the
appliance and invalidate all liability on the part of the manufacturer.
In the event of any maintenance or other structural work in the
immediate vicinity of the  ue or  ue gas exhaust devices and their
accessories, switch the appliance o by switching the external bipolar
switch to the “OFF” position and shutting o the gas control valve.
When the work has been completed, a quali ed technician must
check the e ciency of the  ue and the devices.
Turn the boiler o and turn the external switch “OFF” to clean the
exterior parts of the appliance.
Clean using a cloth dampened with soapy water. Do not use
aggressive detergents, insecticides or toxic products. If the appliance
is used in full compliance with current legislation, it will operate in a
safe, environmentally-friendly and cost-e cient manner.
If using kits or optional extras, make sure they are authentic.
CE labelling
The CE mark guarantees that the appliance conforms to the following
directives:
- 90/396/CEE
relating to gas appliances
- 2004/108/CEE
relating to electromagnetic compatibility
- 92/42/CEE
relating to energy e ciency
- 2006/95/CEE
relating to electrical safety
Symbols used on the data plate
MIN
Q
MA
X
P
60/80°C
1
2
5
4
3
6
7
19
8
9
10
11
12
14
15
16
17
18
13
20
21
22
Legend :
1. Brand
2. Manufacturer
3. Boiler model - Serial number
4. Commercial reference
5. Certi cation number
6. Destination country - gas category
7. Gas setting
8. Installation type
9. Electrical data
10. Maximum domestic hot water pressure
11. Maximum heating pressure
12. Boiler type
13. NOx class / E ciency
14. Input rating nominal heating
15. Power ouput heating
16. DHW speci c  ow rate
17. Boiler output e ciency
18. Input rating nominal DHW
19. Gases which may be used
20. Minimum ambient temperature for use
21. Max. central heating temperature
22. Max. domestic hot water temperature