Filter
Top Products
37InRow SC Operation
Mechanical
Electrical Hazard: Turn off the cooling unit and disconnect all power sources. Perform Lockout/
Tagout procedures before performing any electrical or mechanical service. Wear appropriate
personal protective equipment when checking hazardous voltages.
Check the fans. All components should be moving freely, with no signs of binding or damage.
Verify that the condensate line is flowing freely.
Electrical
Electrical Hazard: Turn off the cooling unit and disconnect all power sources. Perform Lockout/
Tagout procedures before performing any electrical or mechanical service. Wear appropriate
personal protective equipment when checking hazardous voltages.
Electrical Hazard: A Leakage Current Detector and Interrupter (LCDI) plug detects if there is
damage to the power cord that could cause arcing between wires, resulting in a fire. The LCDI shuts
off power if the power cord is damaged.The cooling unit should be in Standby mode before testing
the LCDI plug.
Inspect the power cord for damage. The power cord for the ACSC100 (60Hz) has a test button on the cord
to test the LCDI plug.