Filter
Top Products
InRow SC Operation18
Display Settings
Set display settings, including the time and date, units, passwords, and time-out settings. You can also
adjust contrast, key click, beeper volume, and beep on alarm.
Password & time-out
Path: Main > Set Password
Note: The default user password is apc (lowercase).
Change passwords. Set the Admin and Device passwords.
1. Move the selector arrow next to the Change Passwords option and press the
ENTER key.
2. Select the password to change (either Admin or Device).
3. Enter a new password (up to 8 characters).
4. Press the
ENTER key to confirm.
Time-out. Set the length of time which can elapse when no keys are pressed before the display interface
returns to the scrolling screen status. The password must then be entered to regain access.
Invalidate Now. Override the password time-out and require password entry immediately.
Date and time
Path: Main > Set Date & Time
Set the time.
Enter the correct time, and press the ENTER key. The Time is displayed on some status
screens and is also used in the alarm/event log to time-stamp events.
Set the date. Enter the day, month, and year, and press the ENTER key. The Date is displayed on some
status screens and is also used in the alarm/event log to date-stamp events.
Set the format. Use the up or down arrow keys to select the date Format.
• mm/dd/yyyy (02/10/2009) (Default)
• yyyy-mm-dd (2009-02-10)
• dd-mmm-yy (10-Feb-09)
• mmm-dd-yy (Feb-10-009)
• dd.mm.yyyy (10.02.2009)